Taking pictures and videos
www.kodak.com/go/support
7
Using the auto-focus framing marks to take pictures
When using the LCD as a viewfinder, framing marks indicate the camera focus area.
The camera attempts to focus on foreground subjects, even if the subjects are not
centered in the scene.
1
Press the Shutter button
halfway
.
When the framing marks turn green, focus is accomplished.
2
If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3
Press the Shutter button
completely down
to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (see
) and set Center Zone, the framing marks are fixed at Center Wide.
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
Framing marks
