manualshive.com logo in svg

Kodak DirectView CR 500 System, Руководство пользователя

Поделиться
Скачать
Kodak DirectView CR 500 System Скачать руководство пользователя страница 89

Maintaining Image Quality

August 1, 2003

1F1976

6-9

Improving Image Characteristics

Use the following table to look up a general quality problem and find possible 
solutions. 

Two tools are available for you to improve an image-quality problem:

• Change contrast and brightness

• Change user parameters (a Key Operator function).

NOTE:  If you cannot correct the problem, in the United States and Canada, 

contact Kodak Customer Service Center (CSC) for service at 
1-800-328-2910, prompt 2, then prompt 3 for further assistance. For 
other locations, contact your Kodak service center or representative.

Image Problem

Recommendations

Image is too light

• Decrease the brightness, and then adjust the contrast if needed. 

“Adjusting 

Contrast and Brightness” on page 6-2

. If this causes clipping in the region 

of interest, switch to the raw image and adjust brightness and contrast on 
the raw image.

• If the images are consistently too light, contact your Key Operator.

Image is too dark

• Increase the brightness, and then adjust the contrast if needed. See 

“Adjusting Contrast and Brightness” on page 6-2

. If this causes clipping in 

the region of interest, switch to the raw image and adjust brightness and 
contrast on the raw image.

• If the images are consistently too dark, contact your Key Operator.

Image is too flat

• Increase the contrast, and adjust the brightness. See 

“Adjusting Contrast 

and Brightness” on page 6-2

. 

• If images are consistently too flat, contact your Key Operator.

Image contrast is too high

• Decrease the contrast and brightness. See 

“Adjusting Contrast and 

Brightness” on page 6-2

.

• If image contrast is consistently too high, contact your Key Operator.

Image is too noisy (no edge 
enhancement chosen or applied)

• The image may require more exposure to reduce the amount of noise. 

Check the exposure index in the exam information.

Image is too grainy (with edge 
enhancement applied)

• The image may require more exposure to reduce the amount of noise. 

Check the exposure index in the exam information.

• Cancel the edge enhancement selection.

• Change the tonescale to Raw Data tonescale type. See 

“Changing Image 

Tonescale” on page 6-3

 and adjust contrast and brightness. See 

“Adjusting 

Contrast and Brightness” on page 6-2

. Remove edge enhancement by 

changing it to None.

• Turn off EVP.

• If the enhanced images are consistently too grainy, contact your Key 

Operator. 

Содержание DirectView CR 500 System













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды