Kodak DirectView CR 500 System, Руководство пользователя

Страница: 50 / 236

5-4 1F1976 August 1, 2003
Scanning, Viewing, and Managing Images
Viewing Images
You can configure your system for two viewing modes:
• Pass-through Mode
• QA Mode
Pass-through Mode
In Pass-through mode, the completed exam is processed and routed, typically
without stopping. When Pass-through mode is configured, a button appears
on the
Scan Status screen next to the Erase Cassette button. This button
toggles between Pause Pass-thru and Resume Pass-thru . You can
temporarily pause Pass-through mode by touching the button and
approve or reject an image. To resume Pass-through mode, select .
When the system distributes the image, if necessary, you can recall the image
for review and reprocessing.
QA Mode
If your system is configured in QA Mode, you review the image before you
route it to the selected destinations.
1.
Scan the cassette and refresh the CR 500 screen; a thumbnail image
appears on the
Patient Input
screen. Other images for the patient are
displayed. If there are too many images to display,
Previous
and
Next
buttons appear so that you can access the other images.
2.
Select the thumbnail image to display the image for review.
3.
If the images are acceptable, select
Accept All Images
to send the
image(s) with the same Patient ID to the appropriate network
destinations and complete the study. When all images are accepted, the
button toggles to
End Study.
Select
End Study
to complete the study.
Scanned Image