Kodak DirectView CR 500 System, Руководство пользователя

Страница: 138 / 236

9-30 1F1976 August 1, 2003
Key Operator Functions
HIS/RIS Broker
Configuration
Introduction
The Kodak DirectView CR 500 System utilizes DICOM Worklist Management
to receive study information from the hospital’s HIS/RIS, usually via the Mitra
PACS Broker.
You can set up your CR System to communicate with the HIS/RIS in any
combination of the following:
• Polling— the CR System requests records at a defined interval, filtered by
modality, station name, AE title, and date and time.
• Push— every time a record is created or changed, the Broker sends the
CR System an event notification. The CR System requests specific data
associated with the event. The record is transmitted once and is sent as
soon as it is received by the Broker.
• Remote Patient Query— a single patient query, configured on the
Polling screen, queried from the Patient Query screen.
You can set up your system to operate in any combination, for example:
• Activate Push to reduce the workload impact on the HIS/RIS or PACS
Broker.
• Activate Polling and set the time interval to 24 hours to receive a
complete update once a day.
If polling is active, each time the CR is started the initial complete query is
started and the timer begins for the next query. For example, if the CR is
started at 9:07 and is set to poll every 20 minutes, the first query is at 9:07
and the second one is 20 minutes later, 9:27.
HIS/RIS Broker
Configuration
1.
At the
Key Operator Functions
menu, select
System Configuration
then select
HIS/RIS Broker Configuration.
2.
Select
Polling Configuration.