Kodak Digital Science DC40 Скачать руководство пользователя | Manualshive

Страница: 48 / 58

background image

44

January 1996

Regulatory Information

FCC Compliance and Advisory Statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) this device may not cause
harmful interference, and 2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency
energy and, if not installed or used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: 1) reorient or relocate the receiving
antenna; 2) increase the separation between the equipment and the
receiver; 3) connect the equipment to an outlet on a circuit different
from that to which the receiver is connected; 4) consult the dealer or an
experienced radio/TV technician for additional suggestions.

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Where shielded interface cables have been provided with
the product or specified additional components or accessories
elsewhere defined to be used with the installation of the product, they
must be used in order to ensure compliance with FCC regulations.

«
...
46
47
48
49
50
...
»

Содержание Digital Science DC40



























































Отзывы:

Нет отзывов

Похожие инструкции для Digital Science DC40

Бренд: IDS Страницы: 32

Бренд: Safety Vision Страницы: 21

Бренд: Olympus Страницы: 4

Бренд: Olympus Страницы: 101

Бренд: Olympus Страницы: 121

Бренд: Olympus Страницы: 82

Бренд: Olympus Страницы: 73

Бренд: Olympus Страницы: 70

Бренд: Olympus Страницы: 78

Бренд: Olympus Страницы: 80

Stylus TG-Tracker

Бренд: Olympus Страницы: 79

Бренд: Olympus Страницы: 74

Бренд: Olympus Страницы: 74

Бренд: Olympus Страницы: 82

SP-590 UZ - Digital Camera - Compact

Бренд: Olympus Страницы: 86

Бренд: Olympus Страницы: 69

Бренд: Olympus Страницы: 94

Бренд: Olympus Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды