Koch PxtFX, Руководство по эксплуатации

Страница: 64 / 96

Operating manual PxtFX active energy management device
V1.1DE/EN
14
4 Transport / Storage / Installation
En
glish
4.4 Unpacking the PxtFX active energy management device

Carefully remove the PxtFX active energy management device from its packaging.

Check that nothing is missing and that it is undamaged.

Dispose of the packaging in accordance with local regulations for cardboard boxes
and recyclable materials.
4.5 Installing the PxtFX active energy management device
Basic information • The PxtFX active energy management device is intended to be installed in an
electrical cabinet.
• The PxtFX active energy management device must be protected against
penetration of foreign bodies in the cabinet.
• The unit is installed directly on a mounting surface in the control cabinet.
Distances During installation, the following distance to other modules must be maintained:
• Above and below: at least 100 mm.
• Sufficient fresh air supply from below must be available.
• Air circulation in the free space must be ensured.
Installation location • PxtFX devices with energy module(s) may only be mounted hanging upright and
are marked with a "TOP" sticker.
Fig. 6: "TOP" sticker
Risk of damage!
Assembly upside down is prohibited!