Kobelt 5027-A, Руководство владельца по эксплуатации, установке и техническому обслуживанию

Страница: 20 / 29

KOBELT MANUFACTURING CO. LTD MNL-5027-A.docx (rev B) 20
5.4
R
ECOMMENDED
S
PARES
The spare parts kept on hand will depend on the severity of the service. As a minimum Kobelt
recommends keeping the following parts for each brake in service:
1. One Lined set of brake shoes
2. One set of brake pads with rivets
3. One actuator
4. Two seal kits
Refer to the parts list drawings in Appendix B for a complete list of parts.
It is recommended that any required service work on a Kobelt unit be
performed by a factory authorized service representative. Please contact
the nearest Kobelt authorized distributor for assistance.
The table below itemizes which kit/spare part numbers change with the various brake
configuration options. Please reference this table to ensure you receive the correct parts.
Table 6: Configuration Kit Numbers
Configuration Kit Numbers
Actuator Code Actuator No. Description
-A 6130 30 sq. in.
-A20 6120 20 sq. in.
Disc Code Shim Kit Disc Thickness
-175 5027-1750 1.750 in
-150 5027-1500 1.500 in
-125 5027-1250 1.250 in
-100 5027-1000 1.000 in
Friction Code Lined Shoe Friction Material
-N 5027-LSN4 non-sparking
-C 5027-LSC4 low COF (.12-.15)
-E 5027-LSE4 mid COF (.25-.28)