KoamTac SMARTSLED KDC400 Series, Руководство пользователя, Страница: 77 / 231

KDC User Manual B
LUETOOTH
77
Control Character Transmission in HID mode
Control characters between ASCII values 0x00 and 0x1F may be replaced by the
ALT+Numpad or ^+Character.

Disabled

Transmit the original control character.

Alt+Numpad

Transmit Alt+ ASCII value from Numpad.

^+Character

Control characters would be substituted as shown in the following
table.

Replacement to |

Control characters would be substituted as “|”.
Control
Char
Transmit
Chars
Control
Char
Transmit
Chars
Control
Char
Transmit
Chars
Control
Char
Transmit
Chars
0x01 ^A 0x0B ^K 0x14 ^T 0x1D ^]
0x02 ^B 0x0C ^L 0x15 ^U 0x1E ^^
0x03 ^C 0x0E ^N 0x16 ^V 0x1F ^_
0x04 ^D 0x0F ^O 0x17 ^W
0x05 ^E 0x10 ^P 0x18 ^X
0x06 ^F 0x11 ^Q 0x19 ^Y
0x07 ^G 0x12 ^R 0x1A ^Z
0x09 ^I 0x13 ^S 0x1C ^\
Function Key Transmission in HID mode
The user may send F1 to F12 function keys by scanning special barcodes in HID mode.
Disconnect/Reconnect/BT(HID) Toggle
The user may disconnect or reconnect the Bluetooth connection, and toggle the soft
keyboard using side buttons.
Bluetooth
Profile UP Key
DOWN Key
(DisconnectBTN disabled)
DOWN Key
(DisconnectBTN enabled)
SPP Does nothing Does nothing Releases BT connection
HID iOS Reconnect Soft Keyboard Toggle if
pressing less than 3sec
Soft Keyboard Toggle if
pressing less than 3sec,
Releases BT connection
MFi Reconnect Does nothing Releases BT connection
SPP 2.0 Does nothing Does nothing Releases BT connection
HID normal Reconnect Does nothing Releases BT connection