SKX6Pro/SKXPro/SKX5
Quick Guide
See Reference Manual for more detailed information
to purchase additional SKX6Pro/SKXPro/SKX5 and accessories.
QG_SKX6Pto_SKXPro_SKX5_20221014 p3
1.2
How to Turn On and Off
Refer to the figure in
section 1.1
to locate the buttons and keys.
The SKX6Pro/SKXPro/SKX5 does not have its own internal battery but rather draws power from the XCover
Pro/6Pro/5
’s battery
. The SKX6Pro/SKXPro/SKX5 works only when the XCover Pro/6Pro/5 is mounted into
SKX6Pro/SKXPro/SKX5 Scanning Sled. If you need to access the SKX6Pro/SKXPro/SKX5 or the XCover
Pro/6Pro/5, you can access them by using the USB port from the back of the SKX6Pro/SKXPro/SKX5.
To turn on the XCover Pro/6Pro/5, press and hold the SIDE key for a few seconds.
To turn off the XCover Pro/6Pro/5, press and hold the VOLUME DOWN and SIDE keys simultaneously.
Alternatively, open the notification panel and tap power icon.
1.3
Power Hibernation Mode (SKX5 Only)
To save the battery of the phone, you can turn off the SKX5 sled when you are using the sled actively.
(hibernation mode)
Press and hold the left and the right SCAN buttons at the same time for 3 seconds and you will hear the beep
sound. Then the sled now turns off. To use the sled again, follow the same direction. That is, press and hold
the left and the right SCAN buttons at the same time for 3 seconds and you will hear the beep sound. Then
the sled now turns back on.
