KDC480 & KDC485
Quick Guide
See Reference Manual for more detailed information.
to purchase additional products and accessories.
QG_KDC480/485_20220317 p4
3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth
profile. If you are unsure which Bluetooth profile is right for you, please refer to the
previous panel.
4. Check the list of available Bluetooth devices on your host device.
5. From the list, select KDC480/485 listed by serial number in brackets that matches the
serial number found on the back side of the KDC480/485.
6. In HID mode, KDC480/485 is now ready to use.
7. To complete connection in SPP/MFi mode, launch KTSync or your application and
select KDC480/485.
* The KDC480/485 will beep when successfully connected.
2.3
Bluetooth Pairing a KDC480-BLE/485-BLE to your smart device with special barcodes
Bluetooth Profile & Pairing
#1. HID-BLE & Pairing (Android, iOS, Mac)
#2. HID-Windows & Pairing (Windows)
#3. SPP-BLE & Pairing (Android, iOS, Mac, Windows)
a.
Navigate to the Bluetooth setting on the host device and ensure that Bluetooth is both
enabled and searching for devices.
b.
Using the KDC, scan the pairing barcode above that corresponds to your desired
Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer
to
