background image

Using the mounting accessories

There are a number of clips included in this package that allow you to attach

 [expose] smart

 to various objects.

Mounting 

[expose] smart

 to:

•  iPhone: 4s and 5 series. Refer parts B, C, D and E. Long and short clips accommodate the iPhone with and without a case respectively (fig. A)
•  General purpose clip. Refer part F. Allows attachment of the light to other objects such as garment pockets (fig. B)
•  Lanyard with metal loop. Refer part G. Attach the light to the lanyard provided and keep it handy with your keys (fig. C)

A. 

[expose]

 

smart

 (rechargeable light)

B.  Standard iPhone 4s Clip
C.  Long iPhone 4s Clip
D.  Standard iPhone 5 series Clip
E.  Long iPhone 5 series Clip
F.  General purpose clip
G.  Lanyard with metal loop
H. USB to micro-USB cable

A

B

C

D

E

F

H

G

Recharging the battery

1.  Connect

 [expose]

 

smart

 to the USB to micro-USB cable

2.  Connect it to a computer’s or another electronic device’s USB port
When using a wall charger, use an approved USB charger only. A full charge 
cycle will take approximately 3 hours.
Battery low/charge status LED is located at the rear of the light.
The LED will flash red when holding a low charge.
While the light is charging, the battery low/charge status LED will be red, 
turning green once fully charged.

Wall charger specifications:

DC Output: 5VDC (+0.25V/-0.1V) >=0.5A. Use chargers with suitable approvals and certifications only.
Charging conditions: Indoors only in temperatures above 10

o

C (50

o

F).

Status 

LED

BefoRe fiRst Use:

Please fully recharge

 [expose]

 

smart

 before first use.

(fig. A)

(fig. B)

(fig. C)

Micro USB port

english 

Page 1 / 4

includes:

Manual mode

Using the light manually

1.  Press/hold the button for 2 seconds to turn the light on
2.  Press/release the button to switch between modes 

(there are 3 brightness levels to choose from)

3.  Position the light to provide best illumination
4.  Take photos and videos when you’re ready
5.  To turn the light off, press/hold the button again for 2 seconds

Button

features and function

effect

High

Medium

Low

Adjustment options

Brightness / White balance / Zoom

Brightness / White Balance

Mode

1

2

3

 

Photo

Video

Modes of use

Flash / Constant

Strobe / Constant

Runtime (minutes)

 

< 20

< 40

< 70

image options

 

Normal / Square / Grid

Normal

other

 

Sharing* / Preview

Sharing* / Preview

* Note:

 Social sharing options will vary 

depending on the user’s custom setup and is 
subject to change from time to time when the 
application is updated. Information at time of 
printing is correct. For updates, please refer to 
to the website at 

knog.com.au

Отзывы: