KNINEPAL OUTDOOR DOG WATER FOUNTAIN
Please visit our website www.KninePal.com
to view installation tips and videos
READ AND SAVE THESE INSTRUCTIONS
Models: DWFYF02 DWFYF02CA
About This Product
Thank you for purchasing this outdoor water fountain.
KninePal water fountain is inspired by our love for dogs,
designed to help pet owners, and supported by the best
customer care.
The fountain is manufactured using premium parts and
tested through rigorous quality control process for
durability and trouble-free operation. You can trust this
product to provide your dog easy access to fresh, cool,
and clean drinking water at all times.
Please take a few minutes to thoroughly read this user guide to properly set up the fountain and train
your dog to use.
If you have any questions about the operation or installation of your fountain, please visit our website
www.KninePal.com/support or call our customer care line at 360-2326902.
CAUTION
►1
Do not place the water fountain near electrical cord or outlets to prevent electrical
shock.
►2
Place the water fountain in a shaded area to keep water cool and fresh. Avoid prolonged
exposure to the direct sunlight.
►3
The product is made of steel with anti rust coating. Normally it won't
rust unless the coating is scrape off using sharp objects.
►4
Be sure to disconnect during frigid or winter
weather. Frozen water may damage the fountain and pipes.
Installation
KninePal water fountains is easy to set up. Follow the steps to install your fountain properly.
►1
Choose
a location away from electrical outlets or cords, and have ample space for training. Also avoid placing the
fountain in lower spot, near building foundation, or on the pathway.
►2
Connect the male end of the hose
(or the
spigot)
into the barbed connector at the rear of the valve body. Make sure the included rubber
o-ring seal is in place and the connection is tight.
►3
Shut off garden faucet and attach the female end of
the hose (or the fitting) to your garden faucet or hose. Make sure the included rubber washer is in place
before making connection.
►4
Turn on the water to test for leakage. If there is leak, double check for the
presence of rubber seals.
►5
Purge the air from the hose by depressing the pedal until water comes out.
►6
Adjust water pressure to control water stream height. The pressure can be adjusted by turning the fill
valve using a flathead screwdriver. The fill valve (looks like a flathead screw) is located on the brass
valve body between two pedals. Turn the screw clockwise to reduce the height, and turn the screw
counter-clockwise to increase the height.
►7
Yon may also adjust the water stream height by using the
black control valve on the two way splitter if the fountain is connected through the splitter.
►8
You may
also want to use the included Y-shape hose splitter to branch out for the fountain. Make sure to check
rubber seal is in place and DO NOT overtighten as it could break the connector.
