knightgroup.co.nz
Tools Required:
Powered Screwdriver
Assembly Instructions
Team Flip
Страница 1: ...knightgroup co nz Tools Required Powered Screwdriver Assembly Instructions Team Flip ...
Страница 2: ...p To prevent possible scratches or damage assemble the table upside down on a soft surface such as a blanket carpet or packaging Attach leg to the top assembly by using bolts spring washer flat washer Tighten using the allen wrench Recommended 2 person Step ...
Страница 3: ...ed washer and screw in the location pictured below slot end closest to the pull bar Leave screw 1 turn from tight so the pull bar can be operated smoothly Fit the pull bar to the top side of the mechanism according to the number corresponding to your worksurface depth This number will locate over of the raised cylinder Place the pull bar a and cross tube b in the cor rect location pictured below s...
Страница 4: ...8mm 64 64 A 2x 2mmØx12mm h 12x 2 5mmØx15mm h 25mm Table Length Table Width 294mm Width 700mm A B C 1200 1600mm 796 146 NA 1500 1900mm 1096 146 NA 1800 2200mm 1396 146 NA Width 900mm A B C 1200 1600mm 796 246 175 1500 1900mm 1096 246 175 1800 2200mm 1396 246 175 Width 800mm A B C 1200 1600mm 796 196 125 1500 1900mm 1096 196 125 1800 2200mm 1396 196 125 200 200 73 73 17 17 17 17 36 5 36 5 1 2mm pilo...
