Please read all the instructions before assembly
Page 1 / 3
i-S12
INDOOR
Please read these instructions carefully before you start to assemble or use this table tennis table.
They contain important information relating to safety, assembly and maintenance.
We recommend you keep these instructions for future reference in case you need to order spare
parts or carry out any maintenance.
Assembly should be carried out by two adults throughout each stage.
Preparation for use
1. Open the carton and check to ensure all accessories and fittings are complete.
2. Install ‘T’ rolling leg according to figure 1 below.
3. Tighten all screws and turn table up the right way ready for use.
Assembly Instructions
Carefully lay both table tops flat and face down on a soft surface. Unlock and unfold pre-assembled
table top, slide ‘T’ rolling leg into designated position and ensure marking tape lines up on each side,
see figure 1.
Figure 1
14mm
Tools required:
