Knick Stratos Pro A201 PH, Руководство пользователя

Страница: 10 / 176

10
Display
Plain‑text messages on a large, backlit LC display enable intuitive op‑
eration. You can specify which values are to be displayed in standard
measuring mode (“Main Display,” see page 35).
Color-Coded User Interface
The colored display backlighting indicates different operating states
(e.g., alarm: red, HOLD mode: orange; see page 36). The display
backlighting can be switched off; see page 94.
Diagnostic Functions
“Sensocheck” automatically monitors the glass and reference elec‑
trodes; and the “Sensoface“ function clearly indicates the sensor
condition; see page 155.
Data Logger
The internal logbook (TAN SW‑A002) can handle up to 100 entries –
up to 200 with AuditTrail (TAN SW‑A003); see page 119.
Two Parameter Sets A, B
The device provides two parameter sets that can be switched manu‑
ally or via a control input for different process connections or different
process conditions.
For an overview of parameter sets (original for copy), see page 50.
Password Protection
Password protection (passcodes) for granting access rights during
operation can be configured; see page 123.
Automatic Calibration with Calimatic
You can choose from the most commonly used buffer solutions,
see page 134.
A custom buffer set can also be entered; see page 147.
Introduction