![Knick Protos CONDI 3400(X)-051 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/knick/protos-condi-3400-x-051/protos-condi-3400-x-051_user-manual_1980169015.webp)
15
Inserting the Module
Note: Be sure to connect the shielding properly!
Switch off power supply
Open the device (loosen the 4 screws at the front)
Place module in slot (D-SUB connector)
Tighten fastening screws of the module
Connect sensor cable
Close device, tighten screws at the front
Switch on power supply
Set parameters
NOTICE!
Be sure to select the sensor type you are using in the parameter
setting menu!
Make sure that the cable
glands are tightly closed to
protect against humidity.
1.
2.
3.
4.
5.
6.
7.
8.
Содержание Protos CONDI 3400(X)-051
Страница 24: ...24 ...
Страница 38: ...38 ...
Страница 51: ...51 Nitric acid HNO3 Hydrochloric acid HCl c by wt c by wt ...
Страница 52: ...52 Sodium hydroxide solution NaOH Table salt solution NaCl c by wt c by wt ...