manualshive.com logo in svg

Knick Portavo 908 MULTI, Руководство пользователя

Поделиться
Скачать
Knick Portavo 908 MULTI Скачать руководство пользователя страница 9

9

Value-Added Features

Memosens
The Portavo 908 can communicate with 
Memosens sensors. These digital sensors are 
automatically identified and the meter switches 
to the appropriate measurement method. When 
a Memosens sensor is connected to the meter, 
it is indicated by the logo shown on the right. 
Furthermore, Memosens allows the storage of cal­
ibration data, which will be available and can still 
be used when the sensor is connected to another 
Memosens­capable device.

Sensoface
Sensoface provides quick information on the 
sensor condition. The three “smiley” faces as shown 
on the right represent the sensor condition during 
measurement and after a calibration. When the 
condition deteriorates, a status message gives a 
hint to the cause.

Calimatic (pH)
Calimatic is a very convenient method for pH 
calibration with automatic buffer recognition.  
You only have to select the buffer set with the 
buffers used. The buffers can then be used in any 
order.

Digital Optical Oxygen Measurement 
Digital optical oxygen measurement reduces 
maintenance effort and simplifies handling.

Overview of the Portavo 908

Содержание Portavo 908 MULTI













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды