KNF SC 950, Руководство по эксплуатации

Страница: 26 / 64

Installation and connection Vacuum Pump System SC/SEM/SH/SR950
26 Translation of original Operating Instructions, English, KNF 125549-125552 07/18
6.2. Connection
1. Connect the vacuum chamber to the gas inlet's hose connec-
tor (Fig. 2/ 19 , p. 13 or Fig. 4/ 16 , p. 17, Fig. 5/ 14 , p. 19 and
Fig. 6/ 13 , p. 21, for hose inside diameter of 10 mm). For this,
vacuum tubing must be used.
2. Connect hose to high-performance condenser in order to
discharge gas exhaust (Fig. 2/ 22 , p. 13 or Fig. 4/ 19 , p. 17,
Fig. 5/ 17 , p. 19 and Fig. 6/ 14 , p. 21, for hose inside diameter
of 10 mm).
Only SC/SEM/SH 950:
CAUTION
Danger of high performance condenser bursting.
The high-performance condenser is not pressure-
proof.

Do not reduce or regulate the quantity of gas at
the gas outlet, and do not install any compo-
nents that hinder the gas flow.
Safely discharge gas exhaust so that no gas can escape into
the ambient air.
Only SC/SEM/SH 950:
Make sure that the high-performance condenser’s gas outlet is
not blocked (high-performance condenser is not pressure-
proof).
3. Only SC/SEM/SH 950:
Attach coolant feed and return to high-performance condenser
(Fig. 2/
20 and 21 , p. 13 or Fig. 4/ 17 and 18 , p. 17 and Fig.
5/ 15 and 16 , p. 19, for hose inside diameter of 8 mm).
SC/SEM 950 only:
Connect only the KNF coolant valve (see Chapter 11.2,
Accessories) to the coolant valve connection (Fig. 2/
14 , p. 13
or Fig. 4/ 12 , p. 17). Consult with KNF before using any other
valves.
4. Only SC/SEM 950:
If necessary: Connect inert gas supply to ventilation connec-
tion (Fig. 2/
18 , p. 13 or Fig. 4/ 15 , p. 17). Observe the safety
instructions in chapter 3. Please contact KNF Service if you
require an inert connection for the gas ballast.
5. Insert the power cable plug into a properly installed shockproof
socket.