Vacuum Pump System SC/SEM/SH/SR950
Servicing
Translation of original Operating Instructions, English, KNF 125549-125552 07/18
53
9.3.7. Final steps
1. Place the pump back into the vacuum pump system and
tighten the four attachment screws (Fig. 21/
9
) to hand-
tightness.
2. Install the suction-side and pressure-side head connections
back onto the pump:
To do this, first insert the two head connection fittings (
8
) into
the connection blocks and then fasten them with the two spring
steel clips (
7
).
3. Put plugs
3
,
4
,
5
and
6
back onto the pump's electrical
connection.
4. Put the grip assembly (
2
) back onto the vacuum pump system
and tighten the four attachment screws (
1
) to hand-tightness.
5. Reconnect suction and pressure lines to the vacuum pump
system.
7. Reconnect the vacuum pump system to the mains power.
If you have any questions about servicing, call your KNF technical
adviser (see last page for contact telephone number).
Содержание SC 950
Страница 63: ......
Страница 64: ...KNF worldwide Find your local KNF partner on www knf com...
