Assembly and function
Vacuum Pump System SC/SEM/SH/SR950
22
Translation of original Operating Instructions, English, KNF 125549-125552 07/18
Collection flask (Fig. 6/
6
) collects on the suction side of the pump
particles and drops that were, contrary to the requirements of the
pump, suctioned from the vacuum chamber. The collection flask is
coated (implosion protection) and fastened to the vacuum pump
system via a flask clip (
4
).
Solvents deposited on the pressure side of the pump are collected
in the collection flask (coated for explosion protection) (
5
). A flask
clip (
4
) fastens the glass flask to the separator adapter.
5.4.2. Vacuum pump system functions
The flow of the pump can be set via the rotary knob on the control
terminal (
2
).
If the rotary knob is rotated to the left until it engages the
mechanical indent, the pump will rotate with a minimum flow
rate of 15%.
If the rotary knob is then rotated farther to the left (past the
mechanical indent), the vacuum pump system's pump will be
switched off.
The gas ballast switch (
3
) can be used to open and close the gas
ballast valve on the vacuum pump system's pump (see Chapter
5.6).
Gas ballast
Содержание SC 950
Страница 63: ......
Страница 64: ...KNF worldwide Find your local KNF partner on www knf com...
