KNF NF 2.35, Инструкции по эксплуатации и монтажу

Страница: 6 / 20

Diaphragm liquid pump NF 2.35 Technical data
KNF Flodos AG BA_NF2-35_EN_02_164912
Translation of original Operating and Installation Instructions
6
4. Technical data
Pump materials
The pump type XP stands for:
Parts in contact with media Material 1)
Pump head
2)
PEEK
Valve plate EPDM
O-ring EPDM
Diaphragm EPDM
Resonating Diaphragm PTFE
Tab. 2
The pump type XT stands for:
Parts in contact with media Material 1)
Pump head 2) PEEK
Valve plate FFKM
O-ring FFKM
Diaphragm PTFE
Resonating diaphragm PTFE
Tab. 3
1)
according to DIN ISO 1629 and 1043.1
2)
The pump head comprises an intermediate plate and a connecting plate
Hydraulic ratings
Parameter Value
PN (nominal pressure) [bar g] 3) 16
Flow rate [ml/min] 4) 350
Max. suction head [mWG] 3
Max. inlet pressure [bar]
3)
0.5
Tab. 4
3)
Higher pressures are possible on a project basis
4)
Measured with water at 20 °C. Flow rates may vary from the values
shown, depending on fluid viscosity, pump head material and the hos-
es/hose connectors used.
Hydraulic connections
Parameter Value
Push-in fittings external Ø [mm] 4 ± 0.1
Push-in fittings external Ø [inches] 5/32 ± 0.004
Recommended hose OD x ID [mm] 4.0 x 2.5
Tab. 5