KNF N922SPE, Перевод оригинальных инструкций по эксплуатации и установке

Страница: 14 / 36

Installation and connection Diaphragm pump N922S_E IP54
14 Translation of Original Operating and Installation Instruction, english, KNF 318667-318664 05/21
7 Installation and connection
Install the pumps only in accordance with the operating parameters and
conditions described in Chapter
4 Technical data .
à
Observe the safety instructions (see Chapter 3 Safety ).
DANGER
Risk of dangerous gas mixtures during pump op-
eration
Depending on the medium being transferred,
breakage of the media-contacting components
can result in a dangerous mixture if the medium
mixes with the air in the compressor housing or
the surroundings.
à
Before using a medium, check the compati-
bility of the media-contacting components
(see
4 Technical data ) with the medium.
7.1 Installing the pump
à
Store the pump at the same ambient temperature as the installation to
mitigate condensation.
Mounting dimensions
à
For mounting dimensions, see the following figures:
Fig.3 Mounting dimensions N922S_E (three-phase AC motor)