background image

Operating Instructions LIQUIPORT EN 

Shipment 

KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English 

25 

5. 

Shipment 

5.1  Checking delivery 

 

Device delivered and packaged 

 

  Check delivery for visible damage 

  Check that delivery is correct and complete using the packing list 

  In the event of a discrepancy, register a complaint. 

  Keep original packaging in case you have to return the item 

 

5.2  Registering a complaint 

 

Device damaged or incomplete 

 

  If there are any visible signs of damage, only accept the delivery 

with reservations. 

  Damage and complaints of any kind should be recorded on the 

delivery note 

  Notify the manufacturer of any damage and complaints 

 

5.3  Arranging for return 

 

Device damaged or incomplete 

 

  Contact KNF before returning the device 

  Flush and decontaminate pump 

  Fill out decontamination declaration and attach to the pump  

  Send the pump in its original packaging to a service location or 

one of our product centres 

  The pump can be sent by parcel service or post in its original 

packaging 

 

 

 

DANGER 

Danger of poisoning, chemical burns, or radioactive contamina-
tion through contact with pump parts that are not decontami-
nated 

Contact with pump parts that are not properly decontaminated will re-
sult in poisoning, chemical burns, or radioactive contamination. 

Use personal protective equipment 

Flush and decontaminate the pump until the possibility of 
danger can be eliminated. 

Label any pumps that are used with particularly dangerous 
media 

Only decontaminated pumps may be sent 

 

 

 

Requirements 

Procedure 

Requirements 

Procedure 

Requirements 

Procedure 

Содержание LIQUIPORT 1.100

















































Отзывы: