KNF LIQUIPORT 1.100, Руководство по эксплуатации

Страница: 22 / 48

Technical data Operating Instructions LIQUIPORT EN
22 KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English
Pump type LIQUIPORT 300 LIQUIPORT 1.300
Flow rate [l/min]
1) 2)
0.5
– 3.0
0.5
– 3.0
Suction head [mWG] 3 3
Max. inlet pressure [bar g]
3)
0.4 0.4
Permissible pressure [bar g] 1.0 6.0
Permissible medium viscosity
[cSt] 150 150
Tab. 11: Hydraulic ratings
Fig. 7: Flow rate curve LIQUIPORT 300
Fig. 8: Flow rate curve LIQUIPORT 1.300
1)
Measured with water at 20°C
2)
Flow rates may vary from the values shown, depending on fluid vis-
cosity, pump head material and the hoses / hose connectors used.
3)
Overpressure on the suction side will result in uncontrolled escape of
fluid, even if the pump is not operating. The pressure increase via the
pump must be positive.
3.11 Hydraulic connections
Pump type Connection
LIQUIPORT 100
LIQUIPORT 1.100 Internal thread NPT 1/8" with hose con-
nector for hose ID 8mm
LIQUIPORT 300
LIQUIPORT 1.300
Internal thread NPT 3/8" with hose con-
nector for hose ID 12mm
Tab. 12: Hydraulic connections