KNF LIQUIPORT 1.100, Руководство по эксплуатации

Страница: 21 / 48

Operating Instructions LIQUIPORT EN Technical data
KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English 21
3.10 Hydraulic ratings
Type LIQUIPORT 100 LIQUIPORT 1.100
Flow rate [l/min]
1) 2)
0.2
– 1.3
0.2 - 1.3
Suction head [mWG] 3 3
Max. inlet pressure [bar g]
3)
0.4 0.4
Permissible pressure [bar g] 1.0 6.0
Permissible medium viscosity
[cSt] 150 150
Tab. 10: Hydraulic ratings LIQUIPORT 100 / LIQUIPORT 1.100
Fig. 5: Flow rate curve LIQUIPORT 100
Fig. 6: Flow rate curve LIQUIPORT 1.100
1)
Measured with water at 20°C
2)
Flow rates may vary from the values shown, depending on fluid vis-
cosity, pump head material and the hoses / hose connectors used.
3)
Overpressure on the suction side will result in uncontrolled escape of
fluid, even if the pump is not operating. The pressure increase via the
pump must be positive.