K'Nex Education 79014, Руководство пользователя

Страница: 1 / 31

1 2
-
1
2
3
K’NEX BUILDING BASICS
Start Building
To begin your model, find the and follow the numbers. Each
piece has its own shape and color. Just look at the pictures, find
the pieces in your set that match and then connect them together.
Try to face your model in the same direction as the instructions
while you build. The arrows show you where the parts connect,
but not all connections points have arrows. Faded colors show
you this section is already built.
Connectors
There are blue and gray connectors with special long slots.
They slide together as you see in the pictures. Push these parts
together until you hear a “click.”
Spacers
There are places in your model where you need to add blue
and silver spacers. Be sure to use the right color and count
them carefully.
1
Keep these instructions in a handy location.
They contain important safety information.
Read all warnings and instructions before you
start to build and operate the model.
WARNING: CHOKING HAZARD -
Small parts. Not for children under 3 years.
CAUTION: Keep hair, hands, face, clothing and power cords away from all
moving parts.
Do not put rods smaller than 2 inches in any openings of the motor; they will
damage the motor, and cannot be removed. Use care where you use these models.
They could damage furniture or walls, or injure people or pets.
CAUTION-ELECTRIC TOY:
Not recommended for children under 8 years of age.
As with all electric products, precautions should be
observed during handling and use to prevent electric shock.
• The product should be examined periodically for potential hazards; any potentially
hazardous components should be repaired or replaced.
• The toy must only be used with the recommended transformer.
• The transformer is not a toy.
• The transformer used with the toy is to be regularly examined for damage to the
cord, plug, enclosure and other parts, and in the event of such damage, they must
not be used until the damage has been repaired.
• Disconnect transformer before cleaning any components.
INPUT: 120 Vac 60 Hz 0.6 A
OUTPUT: 6 Vdc 2000 mA