manualshive.com logo in svg

KNECHT S 200 BS, Руководство по эксплуатации, Страница: 7 / 46

Поделиться
Скачать
KNECHT S 200 BS Скачать руководство пользователя страница 7

8

1.3  Warning signs and their meaning 

1.3.1  Warning and mandatory signs on / in the grinding machine

The following warnings and mandatory signs have been affixed on / in the grinding machine:

CAUTION! DANGEROUS ELECTRICAL VOLTAGE 
(warning sign on switch housing)

The grinding machine carries life-threatening voltage when it is 
connected to the current supply.

Current-carrying device parts may only be opened by authorized 
personnel.

The grinding machine must be separated from the mains supply 
before carrying out servicing, maintenance and repair work on it.

CAUTION! RISK OF INJURY FROM ABRASIVE PARTICLES 
 (mandatory sign on machine front)

Grinding, polishing, deburring and dressing gives rise to grinding 
particles which could enter the eyes.

Wearing protective goggles is mandatory when carrying out such 
work.

1.3.2  General mandatory signs

The following general mandatory signs must be followed: 

CAUTION! RISK OF INJURY FROM KNIFE 

Working with the grinding machine involves grinding knives that 
could cause serious cut injuries due to their sharpness. 

Protective gloves must be worn when clamping and releasing 
knives. 

Caution when transporting blades. Use the protective equipment 
provided by the knife manufacturer. Protective gloves and safety 
shoes must be worn.

1.  Important notes 

Содержание S 200 BS















































Отзывы:

Нет отзывов