17
3. Description
3.3 Functional description
The Universal Wet-Sharpening Machine can be used to grind, deburr and polish linear, sickle-
shaped and circular knives.
All knives other than hand knives must be clamped onto grinding plates and must be ground on
the grinding wheel as well as the wet-grinding belt with corresponding fixtures.
The grinding angle on the grinding wheel can be steplessly adjusted. The grinding angle on the
wet-grinding belt is adjusted with different spacer discs.
Knives can be deburred and polished on the finned brushes without the use of fixtures.
Figure 3-2
Dimensions in mm (S 200 S table model)
CoG
CoG
1000 mm
600 mm
900 mm