29
Semi-Micro Osmometer K-7400S instructions, V3700
10. Using the EuroOsmo 7400 Software
This chapter will explain the basic knowledge needed for working with
K-7400S and the EuroOsmo 7400 software.
Note:
The License Agreement should be read before using the EuroOs-
mo 7400 software (see „14.6 KNAUER software license agreement“ on
page 44). Using the software, the user indi cates that he has read the
License Agreement and agrees with the regula tions.
10.1 Installation
The hardware requirements (processor, working memory) are very low for
the installation of EuroOsmo 7400.
The program runs under Windows 7, 8 and 10, but also with older operat-
ing systems, back to Windows XP.
1.
Insert the EuroOsmo 7400 CD into the CD ROM drive.
2.
Wait for 30 seconds. The set-up starts automatically. You will be gui-
ded through the installation via self-explanatory windows.
3.
If your CD ROM drive does not have AutoPlay:
Double-click on <My Computer>
Right-mouse click on your CD ROM drive.
Select <AutoPlay> from the right-click menu.
4.
If there is no AutoPlay menu, select Explore from the right-click menu,
go to EuroOsmo 7400 / Disk1 and double-click on <Setup.exe>.
10.1.1 Hardware installation
The device has to be connected with a defined port of the computer
(e.g. COM 1) prior to starting the program.
Process
