Overview and Connectors
5
IFU 2.1 User Manual V6805, Version 2.0
Overview and Connectors
Front View of the Device
Computer defect
No electrical isolation is provided for the Interface Box. Voltages above 10 V
could damage connected computers.
Take protective measures.
Use the device according to the specifications.
LED
LEDs indicate the device's condition. The green LED „Power“ shows that the
device has successfully been connected to a computer. The yellow LED „Busy“
shortly lights up during calibration or after receiving a signal from the control
software. Calibration is done when starting a device or a run. „Busy“ perma-
nently lights up if the control software checks on the device's status regularly,
e. g. every second.
Legend
1
AN.IN (data signal input)
2
AN.OUT (output of analog control signal)
3
DIG.IN (trigger input)
4
DIG.OUT and autozero
5
Channel 1
Fig. 2 Front view of interface box IFU 2.1
1
2
3
4
5