4
Intended Use
IFU 2.1 User Manual V6805, Version 2.0
Intended Use
Interface box IFU 2.1 solely supports connections with USB 2.0
1
.
The interface box IFU 2.1 has 4 channels for data recording and device control
for devices that are not supported by KNAUER software. This includes data
recording from detectors via analog inputs, flow rate control for HPLC pumps
via analog outputs or switching of valves via digital outputs. The only require-
ment is that the device supports these tasks. Further informations comes
included with the manual of the device.
The interface box is no standalone device, which means that software control is
strictly required (e. g. KNAUER ChromGate or KNAUER ClarityChrom).
Note:
Which interface box functions are supported by the control software can
bef found in the software manual. The software manual also includes informa-
tion on configuring and programming the interface box for the Smartline Man-
ager 5000.
Scope of Delivery
Contents of the interface box accessories kit:
4 x remote connector, 9-pin
1 x depressor tool
1 x USB cable (mini B/standard A)
1 x cable with wired ends
3 x flat band cable, 10-pin
Fig. 1 Interface box IFU 2.1 with USB connector.
1