7
Disassembling the housing
Removing the sides of device
The two side panels are inserted into the front side of the
housing.
Prerequisite
The device hood is open.
Procedure
Lift the side up and tilt out
Duration
Approx. 3 min
Level of difficulty
Level 2 (from 1 to 7, very easy to very difficult)
Result
The sides of the device are now open. Those repairs which,
according to the instructions in the manual, are to be carried
out inside the device, can be performed.
Overview of open device
Fig. 4
View of open device
Removing the sides
of device
Process
Figure
Legend
A Side panel
1. Lift the side panel
approx. 1 cm
upwards.
2. Tilt out the side
panel and remove.
3. For the second side
panel, follow the
same procedure.
Fig. 3
Removing the side
of the device
A
Legend
A Board for the display
B Gearbox-motor sub-
assembly
C Motherboard
D Board for the photo-
electric sensor
E Slotted
disk
for
alignment
B
C
D
E
A