48
Operation
BlueShadow Detector 50D Instructions V7659
5.7.3 Changing a Link
When new values for the different line parameters are entered, the old
values are overwritten .
Note:
If a program/link is selected in the program/link screen (see ab-
ove), a program that is part of that program/link cannot be edited . Select
program/link “P00”/“L00” in the main screen first to unload the program/
link, first .
1.
Select the device links menu .
2.
Select the link number you wish to change .
3.
Navigate to the line and value you wish to change .
4.
Navigate to the parameter you would like to change and edit its va-
lues via confirmation key
and numeric keypad or via vertical arrow
keys
.
5.7.4 Deleting link lines
Process
Figure
1.
Select the Device Links menu .
2.
Select the link number you wish to change .
3.
Navigate to the to be deleted link line (e .g . line
02) .
4.
Change the line number to “00“ .
5.
You will be asked whether you want to delete
the link line which was active before entering
00 .
6.
Confirm via the confirmation key
or deny via
the menu key
.
5.7.5 Deleting a Link
Process
Figure
1.
Select the Device Links menu and select the
link 00 .
2.
You will be asked which link you want to delete .
Use either the confirmation key
and numeric
keypad or the vertical arrow keys
to select
the link number you wish to delete .
3.
After pressing the confirmation key
, you will
be asked whether you really want to delete the
selected link .
4.
Confirm once more with the confirmation key
or deny with the menu key
.
Procedure
