Knauer BlueShadow 80P Скачать руководство пользователя

Страница: 7 / 74

BlueShadow Pump 80P Instructions V7685

General

1. General

1.1 About these instructions

These operating instructions enable the safe and efficient operation of

the device. The user must have carefully read and understood these ope-

rating instructions before starting any work.
The basic prerequisite for safe operation is compliance with all safety

instructions (see chapter 2 on page 3). In addition to the safety and

warning instructions in these operating instructions, the local accident

prevention regulations and the national industrial safety regulations

apply.
These operating instructions are an integral part of the device. It must be

kept in the immediate vicinity of the device and accessible to the user at

all times.
You can download these and other instructions from the KNAUER web-

site:

www.knauer.net/library

1.2 Signal words

Possible dangers related to the device are distinguished in personal and

material damages.

Symbol

Meaning

DANGER (red) indicates a highly hazardous situa-

tion. If not avoided, it will result in death or serious

injury.

WARNING (orange) indicates a hazardous situa-

tion. If not avoided, it could result in death or

serious injury.

CAUTION (yellow) indicates a moderate hazardous

situation. If not avoided, it could result in minor or

moderate injury.

NOTICE (blue) is used to address issues which are

not related to physical injury.

1.3 Additional typographical conventions

General equal treatment: When persons are described, this document

uses the male grammar form to keep the text easy to read. The form

has a neutral sense and speaks to people of any gender in the same

way.

Note: Specific information are prefixed with the word "Note” and an

information icon.

Note:

This is an example.

Содержание BlueShadow 80P











































































Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды

Knauer BlueShadow 80P, Инструкция по эксплуатации

Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды