15
Installation
BlueShadow Pump 80P Instructions V7685
Process
Figure
1.
Lead a tube from the sol-
vent bottle to the flush
pump’s inlet
1
and fasten.
2.
Lead a tube from the flush
pump’s outlet
4
to the
pump head’s inlet
3
and
fasten it.
3.
Fasten a tube to the pump
head’s outlet
2
and lead to
the waste bottle.
Fig. 4:
Connectors
12
34
for piston
backflushing
4.3 Eluent inlet
Note:
The acessory Kit includes PTFE tubing and PETP bushing/sealing
ring, which can be used for standard HPLC applications. For applications
with aggressive solvents, PEEK or stainless steel parts are available.
The eluent lines are connected by the eluent inlet to the pump head.
Legend
1
Knurled-head screw
2
Eluent inlet
Fig. 5:
Connecting the eluent inlet to the pump head
1
2
