Knauer Azura V 2.1S, Руководство пользователя

Страница: 18 / 51

18 Installation
AZURA V 2.1S User Manual, V6860, Version 2.2
Next Steps
Store packaging and keep the included packing list for repeat orders.
Checking the Scope of Delivery
1. Check whether the device and accessories are complete.
2. If a part is missing, inform the technical support of the manufacturer.
Mounting the Valve onto the Valve Drive
All valve drives are delivered with a ready-mounted valve head. For repeat
orders, the electrical valves are delivered with included adapter plate.
Setting the Valve Mode
You set the mode by means of the 4 DIP switches. The DIP
switch is located on the bottom side of the device.
The valve drive for valves with 6 ports can be set for 6P/3C
or 6P-multiposition valves.
Note: While setting the valve mode, switch the device off.
Switch on the device after the configuration so that the changes become effec-
tive.
Switch Assignment
3. Remove the foam insert. Take out the accessories kit and the manual.
4. Open the accessories kit and check the scope of delivery. In case any parts
are missing, contact the Technical Support.
5. Clasp the device from below, lift it out of the packaging and place it on its
feet. Do not hold onto the front cover.
6. Check the device for signs of damage that occurred during transport. In
case you notice any damage, contact the Technical Support.
7. Place the device in its side of operation. Remove the protective foil.
DIP Function Comment
1 specify valve type -
2 specify valve position -
3 and 4 set the port OUT/BIN 3 on the
back of the device as input or
output set DIP switches 3 and 4
always opposite
Process