AZURA® Detector RID 2.1L / RID 2.1L HighFlow Instructions V6750
18
Product information
1.
On the computer, go to the control panel and check the LAN
properties.
2.
Hook up the router to the devices and the computer.
3.
On the computer, configure the router to set up the network.
4.
Install the chromatography software from the data storage device.
5.
Switch on the device and run the chromatography software.
6.4.1 Configuring the LAN settings
The LAN uses only one server (which is normally the router) from that the
devices automatically receive their IP address.
In Windows, power saving, hibernation, standby, and screen saver
must be deactived.
In case you use an USB-to-COM box, the option "Allow the computer
to turn off ths device to save power" in the devicemanager must be
deactivated for all USB hosts.
For all LAN devices: For all LAN devices: For the network adapter, the
following option in the Device Manager must be deactivated: “Allow
the computer to turn off this device to save power”.
1.
In Windows choose Start > Control Panel > Network and Sharing Cen-
ter .
2.
Double-click on LAN Connection.
3.
Click on the button Properties.
4.
Select Internet Protocol version 4 (TCP/IPv4).
5.
Click on the button Properties.
6.
Check the settings in the tab General . The correct settings for the
DHCP client are:a) Obtain an IP address automatically b) Obtain DNS
server address automatically
7.
Click on the button OK.
6.4.2 Connecting the cables
The router
3
has several LAN ports
2
and one WAN-/Internetport
4
,
that can be used to integrate the LAN into a wide area network (WAN),
e.g. a company network or the Internet. In contrast, the LAN ports serve
to set up a network from devices
1
and a computer
5
. To avoid interfer-
ence, we recommend operating the chromatography system separately
from the company network.
You will find patch cables for each device and the router in the acces-
sories kit. To connect the router to a WAN, an additional patch cable is
required, which is not supplied within the scope of delivery.
Process
Prerequisites
Procedure
1
2
3
4
5
