Knauer Azura P 6.1L, Руководство пользователя

Страница: 19 / 69

KNAUER P 6.1L User Manual V6890 Version 1.2
20 Installation
CAUTION!

Damage to the pump head possible!

Remove the cap fittings from the inlet and outlet
of the pump head prior to use!
Next steps Integrate the pump into the HPLC flow system.
Binary Pump
The figure shows the installation plan for capillary and tubing on
the binary version of the pump. If you own a different version of
the pump, see the corresponding chapter for installation instruc-
tions.
The gray lines represent the connection of the solvents to the
pump and the black lines represent the connection of the piston
backflushing.
Piston backflushing The flushing solution is re-used. Since the flow path is circular,
only one bottle is used for the flushing solution.
Procedure Process Figure
1. Slide the flangeless fit-
ting onto the tubing.
2. Insert the tubing into
the free inlet
1
on the
bottom of the pump
head.
3. Tighten the fitting by
hand.
Fig. 10 Solvent line on the pump
head
1
Capillary layout
Fig. 11 Installation plan for the isocratic pump