Unpacking and Setup
15
P 2.1S/P 4.1S user manual V6870, version 3.1
Next steps:
Integrate the pump into the HPLC flow system.
Control
Pin Header for Remote Control
Fig. 6
Pump, rear view
Legend
1
CE mark
2
Opening of the fan
3
Serial number
4
RS-232 port
5
LAN port
6
Pin header for remote control
7
Power connection - bushing
8
Warning 1
9
Hole for the ground connection
Contact data
Explanation
GROUND
Reference point of the voltage at the signal inputs.
START IN
TTL-compatible input
min. 10 mA
Low active
After receiving a signal from an external device, the
device starts. If controlled with software, an electronic
trigger is send through the LAN.
1
2
3
4
6
5
7
8
9
