12
Symbols and Signs
P 2.1S/P 4.1S user manual V6870, version 3.1
Symbols and Signs
The following symbols and signs can be found on the device, in the chromatog-
raphy software or in the user manual:
Unpacking and Setup
Contacting the Technical Support
You have various options to contact the technical support:
Phone:+49 30 809727-111
Fax:+49 30 8015010
E-mail:[email protected]
Location Requirements
Requirements
The location for the device must meet the following requirements:
Device defect
The device overheats at exposure to sunlight and insufficient air circulation.
Device failures are very likely.
Set up the device in such a way that it is protected against exposure to direct
sunlight.
Keep at least 15 cm clear at the rear and 5–10 cm at each side for air circula-
tion.
Symbol
Meaning
Electric shock hazard
Electrostatic discharge hazard, damages to system,
device, or components can occur.
A device or system marked with CE fulfills the product
specific requirements of European directives. This is con-
firmed in a Declaration of Conformity.
