Knauer Azura P 2.1L, Руководство пользователя

Страница: 41 / 44

P 2.1L user manual V6840, version 3.6
38 Legal Information
Legal Information
Transport damage
The packaging of our devices provides the best possible protection
against transport damage. Check the devices for signs of transport dam-
age. In case you notice damages, contact the Technical Support and the
forwarder company within three workdays.
Warranty conditions
The factory warranty for the device is stipulated by contract. During the
warranty period, any components with material or design-related defects
will be replaced or repaired by the manufacturer free of charge. Please
connect to our website for further information on terms and conditions.
All warranty claims shall expire in the event that any unauthorized changes
are made to the device. This warranty also excludes the following:

accidental or willful damage

damage or errors caused by third parties that are not contractually
related to the manufacturer at the time the damage occurs

wear parts, fuses, glass parts, columns, light sources, cuvettes and
other optical components

damage caused by negligence or improper operation of the device
and damage caused by clogged capillary

packaging and transport damage
In the event of device malfunctions, directly contact the manufacturer.
KNAUER Wissenschaftliche Geräte GmbH
Hegauer Weg 38
14163 Berlin, Germany
Phone: +49 30 809727-111
Telefax: +49 30 8015010
e-mail: support@knauer.net
Internet: www.knauer.net
Warranty seal
A warranty seal is attached on some devices. The warranty seal is color-
coded. A blue seal is used by the assembly or technical support of
KNAUER for devices to be sold. After repair, service technicians stick an
orange seal in identical position. If unauthorized persons interfere with the
device or the seal is damaged, the warranty claim becomes void.
Declaration of conformity
The Declaration of Conformity accompanies the product as a separate
document and is available online:
https://www.knauer.net/de/Support/
Declarations-of-conformity
Disposal
Hand in old devices or disassembled old components at a certified waste
facility, where they will be disposed of properly.