AZURA® Assistant ASM 2.2L Instructions V6803
8
Safe operation of the device modules
Cleaning and caring for the device
3.2
Detector and flow cells
Installing the detector
Electronic defect
Performing maintenance tasks on a switched on device can cause da-
mage to the device.
Switch off the device
Pull the power plug.
Maintenance of the flow cells
Cleaning the flow cells
Connecting the capillaries
Device defect
Intruding liquids can cause damage to the device.
Place solvent bottles next to the device or in a solvent tray.
Moisten the cleaning cloth only slightly.
Component defect
Damage to the flow cell due to incorrect lifting possible.
Lift the detector only on the side of the housing.
Eye injury
Irritation of retina through UV light. High-energy UV light can leak out
from the flow cell or the fiber optic connectors.
Switch off the detector or the lamps.
Performance reduction
Oil drops can contaminate the flow cell.
Do not use compressed air for drying.
Component defect
Damage to the flow cell due to excessive tightening. Observe the
torque of the screw connection.
Use 5 Nm for stainless steel fi ttings
Use 0.5 Nm for PEEK fi ttings.
Product information