DAD 6.1L/DAD 2.1L/MWD 2.1L user manual V6700, version 3.2
6
Intended Use
Intended Use
Note:
Only use the device for applications that fall within the range of the
intended use. Otherwise, the protective and safety equipment of the device
could fail.
Description
The detector can be used for analytical, semi-preparative and preparative
applications.
Operating Ranges
The device can be used in the following areas:
biochemical analysis
chemical analysis
food analysis
pharmaceutical analysis
environmental analysis
Device Overview
Front View
On the front of the device, there are the flow cell and the removable lamp
cover for lamp replacement.
Rear View
On the back of the detector, the connectors for LAN and power plug are
located, as well as the serial number of the device and the power switch
(on/off).
RS-232, Service Interface
Please note that the service interface is solely used for repair and mainte-
nance tasks performed by service technicians.
Legend
1
leak tray
2
capillary guide
3
lamp cover
4
serial number
5
leak management
6
switch/standby key
7
status LED
8
flow cell
Fig. 1
front view (example DAD 6.1L)
8
7
2
3
2
2
4
1
6
5
Legend
1
device information
2
integrator outlets
3
LAN connector
4
service interface
5
multi-pin connector
6
fan
7
connection and
power switch
Fig. 2
rear view (example DAD 6.1L)
2 3 4 5
6
7
1
