manualshive.com logo in svg

Knauer APE20, Инструкция по эксплуатации, Страница: 66 / 76

Поделиться
Скачать
Knauer APE20 Скачать руководство пользователя страница 66

60 

Transport and storage 

 

AZURA® Pump P 2.1L Instructions V6840

9.4.1 

Storing the pump head

If you want to store pump heads separately, proceed as follows:
The pump head has been dismounted (see chapter “8.3.2 Dismounting 

the pump head” on page 54).

 

ƒ

Syringe

 

ƒ

Flushing solution

Process

Procedure

1. 

Fill the flushing solution into a syringe and inject into the capillary at 

the pump head inlet. Leave it for 5 minutes.

2. 

Flush with suitable flushing solution.

3. 

Fill the pump head with isopropanol.

4. 

Seal the inlets and outles with cap fittings.

The pump head can be stored under the ambient conditions described in 

chapter “11. Technical data” on page 62.

Device defect

Residuals chemicals can damage the pump head if they are not being 
removed before storage.

 

For reuse, fl ush the pump head and fi ll it with isopropanol.

 

Before storage, seal the inlets and outlets with cap fi ttings.

Prerequisite

 Materials

Storage conditions

Содержание APE20













































































Отзывы:

Нет отзывов