manualshive.com logo in svg

Knauer APE20, Инструкция по эксплуатации, Страница: 34 / 76

Поделиться
Скачать
Knauer APE20 Скачать руководство пользователя страница 34

 

AZURA® Pump P 2.1L Instructions V6840

28 

Installation and initial startup 

 

ƒ

The device is switched on.

 

ƒ

Mobile Control is installed and running.

 

ƒ

The connection between Mobile Control and the device has been 

established.

Process

1. 

In Mobile Control, click        <Settings>.

2. 

On the <General> tab, choose the device name.

3. 

In <Network Settings>, choose the setting <Static> 

1

.

4. 

Enter the IP address into the text box <IP Address> 

2

.

5. 

If necessary, change the subnet mask and the gateway 

3

.

6. 

Click                 in the top right corner.

7. 

Restart the device (recommended).

1 

IP address mode

2 

Text box for IP 

address

3 

Text field for subnet 

mask/gateway

Fig. 26: 

Network settings for static IP address

The device is now accessible via the static IP address.

4.10.2  Mobile Control: Setting a dynamic IP address via device 

name

 

ƒ

The device is switched on.

 

ƒ

Mobile Control is installed and running.

 

ƒ

The connection between Mobile Control and the device has been 

established.

Process

1. 

In Mobile Control, click        <Settings>.

2. 

On the <General> tab, choose the device.

3. 

In <Network Settings>, choose the setting <DHCP> 

1

.

4. 

Click               in the top right corner.

5. 

Restart the device (recommended).

Prerequisites

Procedure

1

2

3

Result

Prerequisites

Procedure

Содержание APE20













































































Отзывы:

Нет отзывов