manualshive.com logo in svg

Knauer APE20, Инструкция по эксплуатации, Страница: 33 / 76

Поделиться
Скачать
Knauer APE20 Скачать руководство пользователя страница 33

 

AZURA® Pump P 2.1L Instructions V6840

 

Installation and initial startup 

27

Process

1. 

Make sure that there is no overlap between the IP addresses of the 

router and the corporate network.

2. 

In case of an overlap, change the IP address range of the router.

3. 

Use the patch cable to connect the router WAN port to the compa-

ny network.

4. 

Restart all devices, including the computer.

The LAN is now integrated into the company network.

4.9.6 

Controlling several systems separately in LAN

Devices connected to a LAN communicate through ports, which are part 

of the IP address. If more than one chromatography system is connected 

to the same LAN and you plan on controlling them separately, you can 

use different ports to avoid interference. Therefore, the port number for 

each device must be changed and this same number must be entered 

into the device configuration of the chromatography software. We recom-

mend to use the same port number for all devices in the same system.

Note: 

The port is set to 10001 at the factory. You must use the same num-

bers in the device configuration of the chromatography software as in the 

device, otherwise the connection fails.

Process

1. 

Find out port number and change it on the device.

2. 

Enter the port number in the chromatography software.

The connection is established.

4.10  Setting IP addresses via software

Note: 

Check the IT security standards for your lab before intervening in 

the LAN settings.

Static IP addresses are required to run certain chromatography software, 

e.g. Purity Chrom®. For a comprehensive overview on how to set static IP 

addresses for PurityChrom®, refer to the document „PurityChrom® Instal-

lation Guide“ on the PurityChrom® installation CD. 
For Mobile Control and Firmware Wizard, it is possible to set a fixed (sta-

tic) or dynamic (DHCP) IP address via software.

4.10.1  Mobile Control: Setting a static IP address

Note: 

The device is preset to a dynamic address (DHCP). To ensure a 

constant LAN connection between the chromatography software and 

the instrument, we recommend switching the instrument to a static IP 

address for certain applications. More information about LAN settings 

can be found in the 

Mobile Control Software Instructions 

(document no. 

V6851-2).

Procedure

Result

Procedure

Result

PurityChrom®

Содержание APE20













































































Отзывы:

Нет отзывов