8
Danger of explosion
There is a risk of explosion if
the freshness cooler is used
or handled improperly.
Do not store any explosive
substances such as aerosol
containers with flammable propellants in
the cooler.
Risk of ignition and explosion
The freshness cooler is
operated with the refrige-
rant R290 (propane). Ac
-
cording to the DIN EN
378-1 standard, this is assig
-
ned to refrigerant group A3 (flammable
and explosive). If the freshness cooler is
handled improperly, there is a risk that
an inflammable gas-air mixture will form
and be ignited unintentionally.
Never close the ventilation openings.
Do not use any mechanical devices or
other means than those recommended
by the manufacturer to speed up the
defrosting process.
Never damage the refrigerant circuit.
Do not operate any electrical equip
-
ment inside the refrigerator that is not of
the type recommended by the manu
-
facturer.
Electric shock hazard
Faulty electrical installation
or excessive mains voltage
can lead to electric shock.
Safety instructions for the authorized spe-
zialist
•
Only connect the freshness cooler
if the mains voltage and mains fre-
quency of the socket correspond to
the information on the rating plate.
•
Only connect the cooler to an easily
accessible socket so that you can
quickly disconnect the cooler from
the power supply in the event of a
malfunction.
• Do not operate the freshness cooler if
it shows visible damage or if the mains
connection cable or mains plug is
defective.
• If the mains connection cable of the
freshness cooler is damaged, it must
be replaced by the manufacturer or
its customer service or a similarly qua
-
lified person in order to avoid hazards.
• Do not open the housing; leave re-
pairs to authorized specialists. To do
this, contact KMW customer service.
Liability and guarantee claims are ex
-
cluded in the event of repairs carried
out independently, improper connec
-
tion or incorrect operation.
• Never touch the mains plug of the
cooler with wet hands.
