background image

General

Read and keep the operating instruc-

tions

These operating instruc-

tions belong to the Use-

dom model series (herein-

after referred to as 

“freshness cooler”). It con-

tains important information 

on commissioning and handling.

Read the operating instructions, especi

-

ally the safety instructions carfully, befo

-

re using the freshness cooler. Failure to 

follow these operating instructions can 

result in serious injury or damage to the 

cooler.

The operating instruction is based on the 

standards and regulations valid in the 

European Union. Also observe country-

specific guidelines and laws abroad.

Keep this operating instruction for further 

use. If you pass the cooler on to third 

parties, be sure to include these opera

-

ting instructions. 

5

Explantion of symbols

The following symbols and signal words 

are used in this user manual, on the 

freshness cooler or on the packaging:

This signal symbol/word indicates a 

hazard with a high level of risk which, if 

not avoided, will result in death or serious 

injury.

This signal symbol/word indicates a ha

-

zard with a medium level of risk which, if 

not avoided, will result in death or serious 

injury. 

This signal symbol/word indicates a ha

-

zard with a low level of risk which, if not 

avoided, will result in minor or moderate 

injury. 

This signal word warns of possible dama-

ge to property.

Содержание Usedom





















Отзывы:

Похожие инструкции для Usedom