17
Troubleshooting and Service
Electric shock and risk of ignition!
If work is carried out improperly on the
electrics or on the refrigeration system of
the freshness cooler there is a considera-
ble potential for danger.
•
Only have work on the electrical
system and the refrigeration system
carried out by authorized KMW custo
-
mer service.
• Never allow untrained or unauthori-
zed persons to work on the electrical
system or the refrigeration system.
In the event of a fault, check the follo
-
wing points:
• Is the power cord plugged in proper-
ly?
•
Is there voltage at the socket?
•
Is the display active on devices with
an electronic temperature controller?
If the temperature in the cooling area is
too high, check the following points:
•
Were goods accidentally stored that
were too warm?
•
Did you previously have a longer
power outage?
•
Contact KMW customer service if the
fault is not due to any of the causes
listed here. When contacting KMW Cus-
tomer Service, always give the serial
number of the
cooler and the type of fault or a de
-
scription of the malfunction. In any case,
contact KMW customer service if loud
noises and/or strong vibrations occur on
the device.
Contact for service queries
(e.g. with regard to maintenance and
service, repairs, etc.) in principle to your
regionally responsible KMW customer
service.
If you do not know the customer service
responsible for your region, you can
alternatively contact the central KMW
customer service at the following con-
tact adress:
Contact address
KMW Kühlmöbelwerk Limburg GmbH
Limburger Strasse 80
D- 65555 Limburg
Telefon 06431 599 0
Service 0800 59 95 95 9
E-Mail: [email protected]
Service: [email protected]
