10
Risk of health consequences
If the refrigerated island is handled im
-
properly or if there is a lack of control,
there is a risk that the food stored in the
refrigerated island will be adversely
affected and possibly spoil.
If the cooling island is unexpectedly di
-
sconnected from the power supply, e.g.
in the event of a power failure, the per
-
son responsible on site must ensure that
the stored food is checked. Compliance
with the prescribed storage temperature
must be ensured.
Clean up spilled liquids in the goods area
immediately.
Risk of injury
There is a risk of injury if used improperly.
Check at regular intervals whether there
are foreign objects in the goods space
and remove them.
If defrost water leaks out of the refrigera
-
ted island, wipe it up immediately; other
-
wise there is a significant risk of people
slipping and injuring themselves.
When cleaning the refrigerated island,
always use suitable protective gloves to
protect against injuries from sharp de
-
vice edges.
The market operator undertakes to re
-
pair minor damage to the refrigerated
island that does not impair any technical
functions (e.g. dents in the housing cau-
sed by shopping trolleys).
If there is damage to the refrigeration
system or the electrics, the KMW custo
-
mer service must be informed immedia
-
tely. Otherwise there is a considerable
risk of injury.
In the event of improper handling or use,
there is a risk of damaging the refrigera
-
ted island and causing property dama
-
ge.
Always ensure that the refrigerated is
-
land is level on all sides and stands secu
-
rely on all four feet when operating it.
Observe the installation instructions in
these operating instructions.
Never expose the refrigerated island to
direct sunlight and keep the refrigerated
island away from heat sources.
Always note that the refrigerated island
must not heat up above the following
temperatures: +50°C (during operation)
and +70°C (during transport and sto
-
rage).
Malfunctions caused by electromagne-
tic interference
Improper installation of the temperature
controller or improper connection to the
Wurm system can result in malfunctions.
Only use shielded data lines for installa
-
tion and connection.
When installing the data lines, keep a
large distance to load lines
.
